
Switching the appliance on and off
Control panel Display
To switch
on
Touch for 1 second
Indicator lights up. The operational readiness indicators of
the individual cooking zones also light up.
To switch
off
Touch for 1 second
Indicator goes out. The operational readiness indicators of
the individual cooking zones also go out.
After switching on, within approx. 10
seconds a heat setting or a function
must be set, otherwise the appliance au-
tomatically switches itself off.
Setting the heat setting
The control bar is touched where the desired
heat setting is positioned. The heat setting is
shown in the display. Correct to the left or the
right, if necessary. Do not release before the
desired heat setting is reached.
Locking/unlocking the control panel
The control panel, with the exception of the
“On/Off” sensor field, can be locked at any
time in order to prevent the settings being
changed e.g. by wiping over the panel with a
cloth.
Control panel Display
To switch on
Touch
Indicator lights up
To switch off
Touch
Indicator goes out
When you switch the appliance off, the locking function is automatically switched off.
Switching the STOP+GO function on and
off
The STOP+GO function simultaneously
switches all cooking zones that are switched
on to the keep warm setting and then back
to the heat setting that was previously set.
Control panel Display
To switch on
Touch
To switch off
Touch
Heat setting that was previously set (not automatic warm up
function)
STOP+GO does not stop the Timer
function.
STOP+GO locks the whole control panel
except the sensor field
.
Using the automatic warm-up function
All cooking zones are equipped with an au-
tomatic warm-up function. When setting a
heat setting using the automatic warm-up
function, the cooking zone switches to full
power for a certain amount of time and then
automatically switches back to the heat set-
ting set.
electrolux 5
Comentarios a estos manuales