Electrolux TGKITSEA Hoja informativa descargar pdf

Replacing the burner injectors

1. Remove the pan supports.

2. Remove the burner's caps and crowns.

3. With a socket spanner 7 unscrew and remove the

injectors (Fig. 1), and replace them with the ones

required for the type of gas in use (see Table 2).

Town gas

a) Auxiliary and semi rapid burners: after fitting the

nozzles ( lett. "B"), screw the provided grid filter "A" (Ø

10) on them;

b) Rapid burner: screw the provided grid filter assembly

"C" (Ø 16) on it.

c) Triple crown burner: screw the provided grid filter

assembly "C" (Ø 16) on it.

4. Reassemble the parts, following the same procedure

backwards.

5. Replace the rating label (placed near the gas supply

pipe) with the relevant one for the new type of gas

supply. You can find this label in the package of the

injectors supplied with the appliance.

Should the feeding gas pressure be different or variable

compared with the required pressure, an appropriate

pressure adjuster must be fitted on the gas supply pipe,

in compliance with the rules in force.

Adaptation to different types of gas

Fig. 1

Adjusting the minimum level

To adjust the minimum level of the burners, proceed as

follows:

1. Light the burner.

2. Turn the knob on the minimum position.

3. Remove the knob.

4. With a thin screwdriver, adjust the by-pass screw (see

Fig. 2). If changing from town gas to LPG, completely

tighten clockwise the screw, until a small regular flame

is obtained.

When converting from LPG to town gas unscrew

about one turn by-pass pin, until a regular small flame

is reached.

5. Finally check the flame does not go out when quickly

turning the knob from the maximum position to the

minimum position.

This procedure can easily be carried out, anyhow the hob

has been positioned or built in the working top.

Fig. 2

By-pass screw

Town gas

1 2

Adjusting the minimum level 1

Indice de contenidos

Pagina 1 - Adjusting the minimum level

Replacing the burner injectors1. Remove the pan supports.2. Remove the burner's caps and crowns.3. With a socket spanner 7 unscrew and remove the

Pagina 2

BURNER NORMAL REDUCED NORMALPOWER POWER POWERkW kW TOWN GAS LPG G30/G3128-30 mbarinj. 1/100 m3/h inj. 1/100 g/h - G30 g/h - G31Auxiliary (small) Town

Comentarios a estos manuales

Sin comentarios

Electrolux TGKITSEA Hoja informativa

Busca en linea o descarga Hoja informativa para No Electrolux TGKITSEA. Electrolux TGKITSEA Information Sheet Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para No Electrolux TGKITSEA