Electrolux ELM5400MR Manual descargar pdf (Pagina 12)

Troubleshooting

Problems Causes Solutions

The machine does not turn on. The machine is not connected to the

power source.

Connect the machine to the power source.

Contact Electrolux customer service.

The pump is very noisy. Both indica-

tor lights for small and big cups are

No water

No water in the tank. Fill the tank with fresh drinking water.

1. Prime the water circuit.

2. Check correct water tank position.

The loading lever doesn’t reach the

brewing position.

Capsule inserted incorrectly. Empty the used capsule compartment.

Repeat the sequence, open and close the lever. If that

is not enough remove the capsule manually from the

compartment after unplugging the machine.

Preheat the cup with the hot water.

Capsule already used. Open the lever and insert a new capsule.

drips only from the spout and there

is also a spillage from the back of the

brewing spout.

Circuit is not primed Prime the water circuit.

The milk does not froth. Not suitable milk. Use fresh, partially skimmed milk.

The milk is too hot. Use milk at refrigerator temperature.

The whisking spiral is not in place. Make sure that the whisking spiral is correctly as-

sembled.

The frothed milk is too hot or cold.

ing to the Cappuccino and Latte Mac-

chiato line.

Decrease or increase the milk amount.

1 2 ... 7 8 9 10 11 12 13 14

Sin comentarios

Electrolux ELM5400MR Manual Pagina 12