Electrolux EBGL40SP Manual de usuario descargar pdf (Pagina 12)

If you touch while you set the

hours for DURATION, the appli-

ance goes to the END function

setting.

6.

When the set time ends, an acoustic

signal sounds for two minutes.

and the time setting flash in the

display. The appliance deactivates.

Touch a sensor field to stop the

acoustic signal.

7.

Deactivate the appliance.

7.3 Setting the END

1.

Activate the appliance and set a heat-

ing function and temperature.

2.

Touch again and again until the

display shows

. flashes in the

display.

3.

Touch or to set END (first you

set the minutes and then the hours)

and

to confirm.

4.

When the set time ends, an acoustic

signal sounds for two minutes.

and the time setting flash in the

display. The appliance deactivates.

5.

Touch a sensor field to stop the

acoustic signal.

6.

Deactivate the appliance.

7.4 Setting the MINUTE

MINDER

Use the MINUTE MINDER to set a count-

down (maximum 2 h 30 min). This func-

tion has no effect on the operation of the

appliance. You can set the MINUTE

MINDER at any time and also when the

appliance is off.

1.

Touch . and "00" flash in the

display.

2.

Use or to set the MINUTE

MINDER. First you set the seconds

and then minutes and hours.

3.

Touch and at the same time

to reset the set time.

4.

Touch or the MINUTE MINDER

starts automatically after five sec-

onds.

5.

When set time ends, an acoustic sig-

nal sounds for two minutes. "00:00"

and

flash in the display.

6.

Touch a sensor field to stop the

acoustic signal.

7.5 Setting the Time delay

function

DURATION and END can be used

at the same time, if the appliance is to be

switched on and off automatically later. In

case first set the DURATION

and then

END

function (refer to "Setting the DU-

RATION" and "Setting the END" ).

8. AUTOMATIC PROGRAMMES

WARNING!

Refer to the Safety chapters.

There are 9 automatic pro-

grammes and recipes. You can

find the recipes for the automatic

programmes in the "Recipe

book".

8.1 Automatic programmes

Setting an automatic programme:

1.

Activate the appliance.

2.

Touch . The display shows symbol

and number of the automatic pro-

gramme.

3.

Touch or to choose the auto-

matic recipes.

12

www.electrolux.com

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Comentarios a estos manuales

Sin comentarios