Electrolux EHS60041P Manual de usuario descargar pdf (Pagina 18)

– Remove after the appliance is

sufficiently cool: limescale rings ,

water rings, fat stains, shiny metallic

discolorations. Use a special cleaning

agent for glass ceramic or stainless

steel.

2. Clean the appliance with a moist cloth

and some detergent.

3. At the end rub the appliance dry

with a clean cloth.

TROUBLESHOOTING

Problem Possible cause Remedy

You cannot activate the appli-

ance or operate it.

The appliance is not connected

to an electrical supply or it is

connected incorrectly.

Check if the appliance is cor-

rectly connected to the electri-

cal supply (refer to connection

diagram).

Activate the appliance again

and set the heat setting in less

than 10 seconds.

You touched 2 or more sensor

fields at the same time.

Touch only one sensor field.

There is water or fat stains on

the control panel.

Clean the control panel.

An acoustic signal sounds and

the appliance deactivates.

An acoustic signal sounds

when the appliance is deactiva-

ted.

You put something on one or

more sensor fields.

Remove the object from the

sensor fields.

The appliance deactivates. You put something on the sen-

sor field

Remove the object from the

sensor field.

The residual heat indicator

does not comes on.

The cooking zone is not hot

because it operated only for a

short time.

If the cooking zone operated

sufficiently long to be hot,

speak to the service centre.

You cannot activate the outer

ring.

Activate the inner ring first.

The sensor fields become hot. The cookware is too large or

you put it too near to the con-

trols.

Put large cookware on the rear

cooking zones if necessary.

comes on.

The Automatic Switch Off oper-

ates.

Deactivate the appliance and

activate it again.

comes on.

The Child Safety Device func-

tion operates.

Refer to the chapter “Daily

Use”.

and number comes on.

There is an error in the appli-

ance.

Disconnect the appliance from

the electrical supply for some

time. Disconnect the fuse from

the electrical system of the

house. Connect it again. If

comes on again, speak to the

service centre.

If you tried the above solutions and cannot

repair the problem, speak to your dealer or

the customer service. Give the data from

the rating plate, three digit letter code for

the glass ceramic (it is in the corner of the

glass surface) and an error message that

comes on.

Make sure, you operated the appliance cor-

rectly. If not the servicing by a customer

service technician or dealer will not be free

18 electrolux

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Comentarios a estos manuales

Sin comentarios

Electrolux EHS60041P Manual de usuario Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Electrolux EHS60041P