Electrolux EHT7833K Manual de usuario descargar pdf (Pagina 44)

44 electrolux

Fitting the hob to the

worktop

Before fitting the hob into the

cut out, an adhesive seal

must be fitted to the

underside outside edge of

the hob. It is essential that

no gaps are left in this seal

in order to prevent spillage

near the hob seeping into

the cabinet below.

1) Remove the pan

supports, the burners caps

and crowns and turn the hob

upside down, taking care

the ignition candles are not

damaged in this operation.

2) Place the relevant

sealing all around the glass

top edge, taking care that the

sealings meet without

overlapping (Fig. 2).

3) Place the hob in the

cut out, taking care of its

centring.

4) Fix the hob with the

relevant screws supplied

with the injectors kit (see

Fig. 3).

)

A) Sealing gasket

a

Fig. 2

Fig. 3

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Comentarios a estos manuales

Sin comentarios