Electrolux ES-4E3CN Manual de usuario descargar pdf (Pagina 12)

12 electrolux

Electrical connection

ES-4E3

1. The appliance must be connected to the

electricity supply by licensed installer.

2. For connecting the appliance directly to

the mains a cable length of approxi-

mately 120 cm is provided.

3. The appliance must be installed with a

socket supply line, otherwise the fixed

domestic electrical system must include

an isolating device with at least a 3mm

contact opening width to enable all ter-

minals to be cut off from the mains si-

multaneously in accordance with

NIN2000.

4. Removing the appliance:

• Remove the control knobs.

• Remove the plastic screws (B) and the

control panel.

• Remove the recess floor and remove the

appliance through the recess opening.

• Fit the control panel with the plastic

screws.

• Fit the control knobs.

5. Open the terminal box (Detail G).

Connect the terminals as in the connec-

tion diagram.

Close the terminal box.

6. Install as set out in the above text "In-

stallation".

7. Caution! The appliance must be dis-

connected from the mains for servicing.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios