Electrolux ZGF64BK Manual de usuario descargar pdf (Pagina 7)

Installation and assembly

These hobs can be installed in a kitchen unit with an

opening for insertion whose dimensions are shown in

Fig. 10.

The edge of the cut out must have a minimum distance

from the rear wall of 55 mm.

If there are side walls, or sides of the furniture unit near

the hob, the cut out edges must have a minimum

distance of 150 mm. as shown in Fig. 10.

Carry out the building in of the hob as follows:

 put the relevant sealings, supplied with the hob, on the

edges of the cut out, as shown in Fig. 11, taking care

that the sealings meet without overlapping;

 place the hob in the cut out, taking care of its centring;

 fix the hob with the relevant screws (Fig. 12). The

traction of the screws is able to trace the sealing, any

excess of which can then be easily removed.

The edge of the hob forms a double labyrinth seal which

provides a total guarantee against infiltration of liquids.

560

150 min

480

55 min.

FO 2038

Fig. 10

FO 2239

Fig. 11

Building in

Fig. 9

510

580

A = Auxiliary burner

SR = Semirapid burner

R = Rapid Burner

These hobs can be inserted in a built-in kitchen unit

whose depth is between 550 and 600 mm. The hobs

dimensions are shown in Fig. 9.

Fig. 12

FO 0199

a) sealing

1 2 3 4 5 6 7 8 9

Sin comentarios

Electrolux ZGF64BK Manual de usuario Pagina 7