Electrolux DF 6160 Manual de usuario descargar pdf (Pagina 19)

Removing the hood from the wall unit

If, for technical reasons (extraction version/recirculation version

conversion) the extractor hood has to be removed from the wall unit,

proceed as follows:

 Fully withdraw the visor and remove the grease filter.

 Loosen the 4 or 6 mounting screws of the hood (wall unit mounting).

 To loosen both mounting claws (installation aids), place a max 3

mm dia. Phillips screw-driver in the spring opening and

simultaneously press the springs inwards (towards the appliance

housing). Fig. 14.

Important: Hold the hood firmly!

Adjusting the extractor part (E - Fig. 1) - Fig. 15

On wall units with a body depth of 275 mm to 335 mm, the visor depth

can be adjusted as follows:

 Remove both grease filters.

 Loosen the screws on both end-stop brackets and set the visor

depth (min. 275 mm, max. 335 mm).

 Refit the screws.

 Refit the grease filters.

Fig. 14

Fig. 15

1 2 ... 14 15 16 17 18 19 20 21

Sin comentarios

Electrolux DF 6160 Manual de usuario Pagina 19