Electrolux EBSL60CN Manual de usuario descargar pdf (Pagina 21)

5. Put the door with the outer side down

on a soft cloth on a stable surface.

This is to prevent scratches.

6. Clean the glass panel with water and

soap. Dry the glass panel carefully.

When the cleaning is completed, install

the door. Do the above steps in the

opposite sequence.

11.5 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The top lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a halogen,

230 V, 40 W, 300 °C heat resistant

lamp.

4. Install the glass cover.

The side lamp

1. Remove the left shelf support to get

access to the lamp.

2. Use a narrow, blunt object (e.g. a

teaspoon) to remove the glass cover.

3. Clean the glass cover.

4. Replace the lamp with a halogen,

230 V, 40 W, 300 °C heat resistant

lamp.

5. Install the glass cover.

6. Install the left shelf support.

12. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

12.1 What to do if...

Problem Possible cause Remedy

You cannot activate or op‐

erate the oven.

The oven is not connected

to an electrical supply or it

is connected incorrectly.

Check if the oven is cor‐

rectly connected to the

electrical supply (refer to

the connection diagram if

available).

ENGLISH 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comentarios a estos manuales

Sin comentarios