Electrolux EBSL7SP Manual de usuario Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
Problem Possible cause Remedy
The display shows
“Demo”. The appli-
ance does not heat
up. The fan does
not operate.
The test mode is activated.
1.
Deactivate the appli-
ance.
2.
Touch and hold until
the appliance activates
and deactivates.
3.
Touch and hold and
at the same time un-
til an acoustic signal
sounds and “Demo”
goes out.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
We recommend that you write the data here:
Model (Mod.) .........................................
Product number (PNC) .........................................
Serial number (Serie:) .........................................
13. INSTALLATION
WARNING!
Refer to the Safety chapters.
13.1 Installing the oven
A
A
A
A
D
435
A
60
170
105
A 757
N 762
A 567
N 605
A 548
N 550
5 / 6 = 635
6 / 6 = 762
ca.50
WARNING!
Installation into flammable material
must agree with NIN SEV 1000
(Swiss Association of the Cantonal
Fire Insurance Companies) fire
protection guidelines and regula-
tions.
A = appliance
N = recess
1.
Pull the appliance drawer out as far
as it goes and remove it.
2.
Slide the oven flush into the recess.
CAUTION!
Make sure the cable is free when
you move the appliance.
3.
Use a minimum of 2 screws to attach
the oven on the 2 sides (Detail A).
22
www.electrolux.com
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios