Electrolux EGC3313NOK Manual de usuario descargar pdf (Pagina 12)

Green and yellow - Earth

Blue - Neutral

Brown - Live

1.

Connect the green and yellow (earth)

wire to the terminal in the plug which

is marked with the letter 'E' or the

earth symbol

, or coloured green

and yellow.

2.

Connect the blue (neutral) wire to the

terminal in the plug which is marked

with the letter 'N' or coloured black.

3.

Connect the brown (live) wire to the

terminal in the plug which is marked

with the letter 'L' or coloured red.

There must be no cut or stray strands of

wire present. The cord clamp must be

correctly attached on the outer sheath.

WARNING!

Make sure that the cut off plug is

disposed of safely. A cut off plug

put into a 13 amp socket is a

safety hazard. There is a risk of

electrical shock.

The replacement of the electrical

cable must be done by a qualified

electrician or competent person,

according to the current regula-

tions.

7.6 Replacement of the

connection cable

To replace the connection cable use only

H05V2V2-F T90 or equivalent type. Make

sure that the cable section is applicable to

the voltage and the working temperature.

The yellow/green earth wire must be ap-

proximately 2 cm longer than the brown

(or black) phase wire.

7.7 Building in

30 mm

55 mm

40-50 mm

min. 650 mm

490 mm

min. 450 mm

270 mm

If several 30 cm hobs are to be installed

side by side into the same cut out, an as-

sembly kit including a support side brack-

et and supplementary seals is available at

our Service Centres. The relevant installa-

tion instructions are supplied within the kit

package.

=

=

490

+1

mm

270

+1

mm

600mm

R 5mm

7.8 Possibilities for insertion

Kitchen unit with door

The panel installed below the hob must

be easy to remove and let an easy access

in case a technical assistance intervention

is necessary.

12

www.electrolux.com

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios