Electrolux EGD6576NOK Manual de usuario descargar pdf (Pagina 15)

• You can remove the pan supports to

easily clean the hob.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy

water and dry them carefully before you

put them back.

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

• The pan supports are not dishwasher

proof. They must be washed by hand.

• The enamel coating occasionally can

have rough edges, so be careful when

you wash the pan supports by hand

and dry them. If necessary, remove

stubborn stains with a paste cleaner.

• Make sure you position the pan sup-

ports correctly after cleaning.

• To make the burners work correctly,

make sure that the arms of the pan

supports are in the centre of the burner.

• Be very careful when you replace

the pan supports to prevent the hob

top from damage.

After cleaning, dry the appliance with a

soft cloth.

WARNING!

Do not put the aluminium foil on

the hob top to keep the surface

clean during the cooking.

Scratches or dark stains on the

glass ceramic have no effect on

how the appliance operates.

Removing the dirt:

– Remove immediately: melting

plastic, plastic foil, and food con-

taining sugar. Use a special glass

ceramic scraper. Put the scraper

on the glass ceramic surface at an

acute angle and slide the blade on

the surface.

– Stop the appliance and let it

cool down before you clean: lime-

scale rings, water rings, fat stains,

shiny metallic discolorations. Use a

special cleaner for glass ceramic.

Clean the appliance with a damp

cloth and some detergent. The pan

supports are not dishwasher proof;

they must be washed by hand. After

cleaning, make sure that the pan sup-

ports are correctly positioned.

At the end rub the appliance dry

with a clean cloth.

6.1 Cleaning of the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode.

Keep these components well clean to

prevent difficult lighting and check that the

burner crown holes are not obstructed.

6.2 Periodic maintenance

Periodically speak your local Service

Force Centre to check the conditions of

the gas supply pipe and the pressure ad-

juster, if fitted.

7. TROUBLESHOOTING

Problem Possible cause and remedy

You cannot start the ap-

pliance or operate it.

• You touched 2 or more sensor fields at the same

time. Only touch one sensor field.

• There is water or fat stains on the control panel.

Clean the control panel.

• Start the appliance again and set the heat setting in

10 seconds.

• The child safety device or key lock or Stop+Go op-

erates. See the chapter Daily use.

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comentarios a estos manuales

Sin comentarios

Electrolux EGD6576NOK Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Electrolux EGD6576NOK