Electrolux EGS7658SXX Manual de usuario descargar pdf (Pagina 10)

remove stubborn stains with a paste

cleaner.

3. After you clean the pan supports,

make sure that they are in correct

positions.

4. For the burner to operate correctly,

make sure that the arms of the pan

supports are aligned with the centre

of the burner.

6.3 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not,

the dirt can cause damage to the hob.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and non-abrasive

detergent. After cleaning, wipe the

hob dry with a soft cloth.

• To clean the enamelled parts, cap

and crown, wash them with warm

soapy water and dry them carefully

before you put them back on.

Easy Clean Coating

• To clean the hob remove any food

remains from the cooking surface.

• Clean the hob with warm water and

non-abrasive detergent.

• To dry the hob after cleaning wipe it

with a soft cloth or chamois leather.

• To clean the Easy Clean surface

everyday use a soft cloth moistened

with water or glass cleaner. We do not

recommend the use of paper towels

which can leave streaks on the

surface.

WARNING!

Harsh detergents and hard

water can leave stains on

the stainless steel surface.

6.4 Cleaning the spark plug

This feature is obtained through a

ceramic ignition candle with a metal

electrode. Keep these components well

clean to prevent difficult lighting and

check that the burner crown holes are

not obstructed.

6.5 Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the

conditions of the gas supply pipe and the

pressure adjuster, if fitted.

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Remedy

There is no spark when

you try to activate the

spark generator.

The hob is not connected

to an electrical supply or it

is connected incorrectly.

Check if the hob is correct‐

ly connected to the electri‐

cal supply.

The fuse is released. Make sure that the fuse is

the cause of the malfunc‐

tion. If the fuse releases

again and again, contact a

qualified electrician.

Burner cap and crown are

placed incorrectly.

Place the burner cap and

crown correctly.

www.electrolux.com10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comentarios a estos manuales

Sin comentarios