Electrolux EHG30830X Manual de usuario descargar pdf (Pagina 9)

• When you wash the pan supports by

hand, take care when you dry them as

the enamelling process occasionally

leaves rough edges. If necessary, remove

stubborn stains using a paste cleaner.

• Make sure you position the pan supports

correctly after cleaning.

• To make burners work correctly, make

sure that the arms of the pan supports

are in the centre of the burner.

• Be very careful when you replace the

pan supports to prevent the hob top

from damage.

After cleaning, dry the appliance with a soft

cloth.

The stainless steel can become tarnished if

it is too much heated. Refer to this you

must not cook with potstones, earthenware

pans or cast iron plates. Do not use alumi-

nium foil to prevent damage the top during

operation.

Removing the dirt:

1. – Remove immediately: melting plas-

tic, plastic foil, and food containing

sugar.

–

Stop the appliance and let it cool

down before you clean: limescale

rings, water rings, fat stains, shiny

metallic discolorations. Use a special

cleaner applicable for surface of hob.

2. Clean the appliance with a damp cloth

and some detergent.

3. At the end rub the appliance dry

with a clean cloth.

Cleaning of the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode. Keep

these components well clean to prevent dif-

ficult lighting and check that the burner

crown holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force

Centre to check the conditions of the gas

supply pipe and the pressure adjuster, if fit-

ted.

WHAT TO DO IF…

Problem Possible cause Remedy

There is no spark when lighting

the gas

• There is no electrical supply • Make sure that the unit is

connected and the electrical

supply is switched on.

• Control the fuse. If the fuse is

released more than one time,

refer to a qualified electrician.

• Burner cap and crown are

placed uneven

• Make sure that the burner

cap and crown are in correct

positions.

The flame is blow out immedi-

ately after ignition

• Thermocouple is not heated

sufficient

• After lightning the flame,

keep the knob pushed for

approximately 5 seconds.

The gas ring burns unevenly • Burner crown is blocked with

food residues

• Make sure that the injector is

not blocked and the burner

crown is clear of food parti-

cles.

If there is a fault, first try to find a solution to

the problem yourself. If you cannot find a

solution to the problem yourself, speak your

dealer or the local Service Force Centre.

electrolux 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Electrolux EHG30830X Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Electrolux EHG30830X