
•
- — 1.5 hours
3.3 The heat setting
Touch to increase the heat setting.
Touch
to decrease the heat setting.
The display shows the heat setting. Touch
and at the same time to deactivate
the cooking zone.
3.4 Activation and deactivation
of the outer ring
You can adjust the surface you cook to
the dimension of the cookware.
To activate the outer ring touch the sen-
sor field
. The indicator comes on.
Do the procedure again to deactivate the
outer ring. The indicator goes out.
3.5 Automatic Heat Up
You can get the necessary heat setting in
a shorter time if you activate the Automat-
ic Heat Up function. This function sets the
highest heat setting for some time (see
the diagram), and then decreases to the
necessary heat setting.
To start the Automatic Heat Up function:
1.
Touch . comes on in the dis-
play.
2.
Touch again and again until
comes on in the display.
3.
Immediately touch again and
again until the necessary heat setting
comes on. After 3 seconds
comes
on in the display.
To stop the function, touch
.
1
2
3
4
5
6
7
8
9
10
11
0
123456789
3.6 Power function
The Power function makes more power
available to the induction cooking zones.
The Power function can be activated for a
limited period of time ( see Technical infor-
mation chapter). After that, the induction
cooking zone automatically sets back to
highest heat setting. To activate, touch
, comes on. To deactivate, change
the heat setting.
3.7 Power management
The power management divides the pow-
er between two cooking zones in a pair
(see the illustration). The power function
increases the power to the maximum level
for one cooking zone in the pair. The
power in the second cooking zone auto-
matically decreases. The heat setting dis-
play for the reduced zone changes be-
tween two levels.
3.8 Timer
Use the Count Down Timer to set how
long the cooking zone operates for only
this one time.
Set the Timer after the selection of
the cooking zone.
You can set the heat setting before or af-
ter you set the timer.
•
To set the cooking zone:touch
again and again until the indicator of a
necessary cooking zone comes on.
•
To activate or change the Timer:
touch
or of the timer to set the
time (
00
-
99
minutes). When the in-
dicator of the cooking zone starts to
flash slow, the time counts down.
• To deactivate the Timer: set the
cooking zone with
and touch to
deactivate the Timer. The remaining
time counts back to
00
. The indicator
of the cooking zone goes out.
ENGLISH 7
Comentarios a estos manuales