Electrolux EHG7765X Manual de usuario

17Welcome to the world of ElectroluxThank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasu

26Fig. 6Choose fixed connections or use a flexible pipe instainless steel in compliance with the regulation in force.If using flexible metallic pipes,

27Injectors replacement• Remove the pan supports.• Remove the burner's caps and crowns.• With a socket spanner 7 unscrew and remove theinjectors

28Fitting the hob to the worktopThe hob can be installed in a kitchen unit with an openingfor insertion whose dimensions are shown in Fig. 12. Toinsta

29a) Removable panelb) Space possibly useful forconnectionsFig. 13 Fig. 14 Fig. 15Kitchen unit with doorProper arrangements must be taken indesigning

30Before leaving the factory this appliance was tested andverified by specialized personnel, in order to ensure bestperformance.Any repair work which

31

04/07Grafiche MDM - Forlìwww.electrolux.co.kr

18These warnings are provided in the interest of safety. You MUST read them carefully before installingor using the appliance. It is very important th

19ContentsThis appliance complies with the followingE.E.C. Directives:- 2006/95 (Low Voltage Directive);- 89/336 (Electromagnetical Compatibility Dire

20Once the hob has been installed, it isimportant to remove any protective materials,which were put on in the factory.Hob burners control knobsThe hob

21Using the hob correctlyTo ensure maximum burner efficiency, it is stronglyrecommended that you use only pots and pans with abottom fitting the size

22Cleaning and MaintenanceDisconnect the appliance from the electricalsupply, before carrying out any cleaning ormanteinance work.The hob is best clea

23!!!!!The following instructions about installation andmaintenance must be carried out by qualifiedpersonnel in compliance with the regulation inforc

24Gas Burners RatingTriple crown Burner 4,0 kWRapid Burner 2,8 kWSemirapid Burner 2,0 kWAuxiliary Burner 1,0 kWAppliance Class 3Category II2H3+Elec

25The appliance is designed to be connected to 220 Vmonophase electricity supply.The connection must be carried out in compliance withthe laws and reg