Electrolux EHGT326X Manual de usuario descargar pdf (Pagina 3)

The following symbols will be found in the text to

guide you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental information



Guide to Use the instructions

1 Rapid Burner - 3,0 kW

2 Auxiliary Burner - 1,0 kW

3 Burner Control Knobs

Contents

Instruction for the User

Description of the appliance

Description of the appliance ......................... 3

Instruction for the User ................................. 3

Cleaning and Maintenance ............................ 4

Guarantee - After Sales Service ................... 5

Technical Data ................................................ 6

Instruction for the Installer ............................ 6

Electrical Connection ..................................... 7

Adaptation to different

types of gas ..................................................... 8

Building In ....................................................... 9

Burner Control Knobs

The hob burner control knobs are situated on the hob front

panel. The symbols on the knobs mean that :

 there is no gas supply

there is maximum gas supply / Ignition setting

there is minimum gas supply

Lighting the burners

For easier lighting, proceed before putting a

pan on the pan support.

1. Push the relevant knob down and turn it anti-clockwise

until it reaches the "maximum" position.

2. After lighting the flame, keep the knob pushed down

for about 5 seconds. This will allow the "thermocouple"

(Fig. 1 lett. D) to be heated and the safety device to be

switched off, otherwise the gas supply would be

interrupted.

3. Then, check the flame is regular and adjust it as

required.

1 2 3 4 5 6 7 8 ... 11 12

Sin comentarios

Electrolux EHGT326X Manual de usuario Pagina 3