Electrolux EHP634X Manual de usuario descargar pdf (Pagina 9)

9

Pilot light

Pilot light is activated when either of

the zones are turned on, and will

remain on until the cooking zones are

switched off.

Residual-Heat indicator

Each plate has a residual heat

indicator which remains on as long as

the temperature of the cooking zone

exceeds 80˚C, even if the cooking zone

is switched off.

16

Minimum distance

to side wall:

150 mm

Minimum distance

to back wall (non-

flammable material):

50 mm

Reinforcement

beams

Mounting

Caution: In order to avoid a hazard this

appliance must be installed according to

these instructions for installation

The appliance unit can be mounted in

any type of kitchen with a work top

whose thickness is between 28 mm and

40 mm.

Clearance

The distance between the top side of the

work top and the carpentry underneath

must be at least 47 mm.

Fixing

Screw the fixing brackets out to such an

extent that they can be turned in under

the work top. Tighten the brackets on to

the work top with an ordinary

screwdriver.

Cut-out measurements

One rectangular hole is sawn out for the

appliance combination chosen.

The depth of the cut-out for any unit is:

490 mm

Length of hole = sum of all units`

externally measured length, less 20 mm.

Mounting of Reinforcement

Beams

A reinforcement Beam, with supporting

flanges at each end, is included with

each two-burner unit. For unit

combinations, a reinforcement beam

must be used between each unit.

Min. 47 mm

1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios