Electrolux EHS60210P Manual de usuario descargar pdf (Pagina 18)

Sensor field Function

11

A control bar To set the heat setting.

12

To set a cooking zone.

13

/

To increase or decrease the time.

14

To activate and deactivate the outer rings.

RESIDUAL HEAT INDICATOR

Warning! The risk of burns from

residual heat!

DAILY USE

ACTIVATION AND DEACTIVATION

Touch

for 1 second to activate or deac-

tivate the appliance.

AUTOMATIC SWITCH OFF

The function deactivates the appliance

automatically if:

• All cooking zones are deactivated.

• You do not set the heat setting after you

activate the appliance.

• You spill something or put something on

the control panel for more than 10 sec-

onds, (a pan, a cloth, etc.). The sound

operates some time and the appliance

deactivates. Remove the object or clean

the control panel.

• You do not deactivate a cooking zone or

change the heat setting. After some time,

comes on and the appliance deacti-

vates. See the table.

• The relation between heat setting and

times of the Automatic Switch Off func-

tion:

•

,

- — 6 hours

•

- — 5 hours

•

— 4 hours

•

- — 1.5 hours

THE HEAT SETTING

Touch the control bar at the heat setting.

Move your finger along the control bar to

change the setting. Do not release before

you have a correct heat setting. The display

shows the heat setting.

ACTIVATION AND DEACTIVATION OF

THE OUTER RINGS

You can adjust the surface you cook to the

dimension of the cookware.

To activate the outer ring touch the sensor

field

/ . The indicator comes on. For

more outer rings touch the same sensor

field again. The subsequent indicator

comes on.

Do the procedure again to deactivate the

outer ring. The indicator goes out.

AUTOMATIC HEAT UP

You can get a necessary heat setting in a

shorter time if you activate the Automatic

Heat Up function. This function sets the

highest heat setting for some time (see the

diagram), and then decreases to the neces-

sary heat setting.

To start the Automatic Heat Up function for

a cooking zone:

1.

Touch

( comes on in the display).

2. Immediately touch the necessary heat

setting. After 3 seconds

comes on

in the display.

To stop the function change the heat set-

ting.

18 electrolux

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Comentarios a estos manuales

Sin comentarios