Electrolux EHS6650P Manual de usuario descargar pdf (Pagina 13)

Touch sensor field + until it reaches the required

heat 1 to 8. The set heat setting will be displayed

first. After five seconds a (= automatic warm up

function) will replace the heat setting in the display.

At the end of the warm up time the heat setting will

be shown again.

3 If during the automatic warm up function you

select a higher setting, eg. from 3 to 5, the

warm up time is adjusted to match. If you se-

lect a lower setting, the warm up time ends at

once.

2 If you start cooking again on a cooking zone

that is still warm, the automatic warm up func-

tion uses the residual heat. This saves time

and energy.

3 If you again wish to switch on a cooking zone

on which hot items are already standing, you

should always select the required heat setting

with the - sensor field. In this way you can

avoid making the food boil over as a result of

the extra burst of heat from the automatic

warm up.

Cooking without the Automatic

Warm up Function

If you wish to use the cooking zone without automat-

ic warm up, select the required heat setting with the

- sensor field.

1. Switch on the appliance and select the desired

cooking zone using the cooking zone selection

buttons.

2. Touch sensor field - to select the required heat

setting from 9 to 1.

3 You can adjust the heat setting at any time us-

ing the + and - buttons, providing the cook-

ing zone has been selected.

Switching off a cooking zone

1. Select the desired cooking zone using the cooking

zone buttons.

2. Press the + and - buttons simultaneously to

switch off.

1 When the rings are still hot cooking should be

carried out without automatic warm up.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

Sin comentarios

Electrolux EHS6650P Manual de usuario Pagina 13