Electrolux EHS7631P Manual de usuario descargar pdf (Pagina 12)

Displaying the time remaining for a cooking zone

Switching off the acoustic signal

Safety cut-out

Cooking surface

• If after switching on the cooking surface, a heat

setting is not set for a cooking zone within approx.

10 seconds, the cooking surface automatically

switches itself off.

• If one or more sensor fields are covered for longer

than approx. 10 seconds, e.g. by a pan placed

upon it, a signal sounds and the cooking surface

switches off automatically.

• If all cooking zones are switched off, the cooking

surface automatically switches itself off after ap-

prox. 10 seconds.

Control panel

3 Moisture (e.g. a wet cloth) or liquid boiling over

onto the control panel immediately switches

all cooking zones off.

Cooking zones

• If one of the cooking zones is not switched off after

a certain time, or if the heat setting is not modified,

the relevant cooking zone switches off automati-

cally. _ is displayed. Before being used again, the

cooking zone must be set to 0.

Step Control panel field Display

1. TIMER Select cooking zone Pilot light of the cooking zone selected flashes faster

The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

Step Control panel field Acoustic signal

1. Touch

TIMER Acoustic signal to acknowledge.

Acoustic signal stops.

Heat setting Switches off after

V, 1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Sin comentarios

Electrolux EHS7631P Manual de usuario Pagina 12