Electrolux EKI6762AOX Manual de usuario descargar pdf (Pagina 12)

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch

( comes on).

Immediately touch ( comes on).

Immediately touch until the correct

heat setting comes on. After 3 seconds

comes on.

To deactivate the function: touch

.

5.8 Power function

This function makes more power

available to the induction cooking zones.

The function can be activated for the

induction cooking zone only for a limited

period of time. After this time the

induction cooking zone automatically

sets back to the highest heat setting.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: touch or

.

5.9 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function or change the

time: touch or of the timer to set

the time (00 - 99 minutes). When the

indicator of the cooking zone starts to

flash slowly the time counts down.

To see the remaining time: set the

cooking zone with . The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

To deactivate the function: set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

When the time comes to an

end, the sound operates and

00 flashes. The cooking

zone deactivates.

To stop the sound: touch .

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and

the cooking zones do not operate. The

heat setting display shows .

To activate the function: touch

.

Touch or of the timer to set the

time. When the time comes to an end,

the sound operates and 00 flashes.

To stop the sound: touch .

The function has no effect

on the operation of the

cooking zones.

5.10 STOP+GO

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, you cannot

change the heat setting.

The function does not stop the timer

functions.

To activate the function: touch .

comes on.

To deactivate the function: touch .

The previous heat setting comes on.

5.11 Lock

You can lock the control panel while

cooking zones operate. It prevents an

accidental change of the heat setting.

Set the heat setting first.

To activate the function: touch .

comes on for 4 seconds. The Timer stays

on.

To deactivate the function: touch

.

The previous heat setting comes on.

www.electrolux.com12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Comentarios a estos manuales

Sin comentarios