Electrolux EQH4512BOG Manual de usuario descargar pdf (Pagina 8)

seconds, (a pan, a cloth, etc.). An

acoustic signal sounds some time and

the appliance deactivates. Remove the

object or clean the control panel.

• The appliance becomes too hot (e.g.

when, a saucepan boils dry). Before

you use the appliance again, wait for

the cooking zone to cool down.

• You use incorrect cookware. The sym-

bol

comes on and the cooking zone

deactivates automatically after 2 mi-

nutes.

• You do not deactivate a cooking zone

or change the heat setting. After some

time

comes on and the appliance

deactivates. See below.

• The relation between heat setting and

times of the Automatic Switch Off func-

tion:

•

, - — 6 hours

•

- — 5 hours

•

- — 4 hours

•

- — 1.5 hours

4.3 The heat setting

Touch the control bar at the heat setting.

Move your finger along the control bar to

change the setting. Do not release before

you have a correct heat setting. The dis-

play shows the heat setting.

4.4 Automatic Heat Up

You can get a necessary heat setting in a

shorter time if you activate the Automatic

Heat Up function. This function sets the

highest heat setting for some time (see

the diagram), and then decreases to the

necessary heat setting.

To start the Automatic Heat Up function

for a cooking zone:

1.

Touch ( comes on in the dis-

play).

2.

Immediately touch the necessary heat

setting. After 3 seconds

comes on

in the display.

To stop the function change the heat set-

ting.

1

2

3

4

5

6

7

8

9

10

11

12

0

1 2 3 4 5 6 7 8 9 101112 1314

4.5 Power function

The Power function makes more power

available to the induction cooking zones.

The Power function can be activated for a

limited period of time ( see Technical In-

formation chapter). After that, the induc-

tion cooking zone automatically sets back

to highest heat setting. To activate, touch

, comes on. To deactivate, change

the heat setting.

4.6 Power function of the

double ring cooking zone

Power function of the inner ring starts

when the appliance senses the cookware

with a smaller diameter than the inner

ring. Power function of the outer ring

starts when the appliance senses the

cookware with a larger diameter than the

inner ring.

4.7 Timer

You can select the timer function with .

The Count Down Timer

Use the Count Down Timer to set how

long the cooking zone operates for only

this one time. It deaktivates the cooking

zone automatically after the time you set.

The selection of Count Down Tim-

er function is possible when the

cooking zone is activated and the

heat setting is set.

8

www.electrolux.com

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comentarios a estos manuales

Sin comentarios