Electrolux EQL4520BOZ HU4 Manual de usuario descargar pdf (Pagina 9)

0 3 5 8 10 14 P

4.4 Cooking zone indication

CAUTION!

Do not place hot cookware

on the control panel.

There is risk of damage to the

electronic parts.

The horizontal line shows the maximum

size of the cookware.

max.

Refer to “Technical information” chapter.

4.5 Bridge function

This function connects two left side

cooking zones and they operate as one.

First set the heat setting for one of the left

side cooking zones.

To activate the function: touch

. To

set or change the heat setting touch one

of the control sensors.

To deactivate the function: touch .

The cooking zones operate independently.

4.6 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch ( comes on).

Immediately touch the correct heat

setting. After 3 seconds

comes on.

To deactivate the function: change the

heat setting.

4.7 Power function

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

zone automatically sets back to the

highest heat setting.

Refer to “Technical

information” chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the

heat setting.

4.8 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the cooking zone then set the

function.The selection of the Timer

function is possible for cooking zones that

are active and after the heat setting is set.

ENGLISH

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

Comentarios a estos manuales

Sin comentarios