Electrolux EQTP4520IK Manual de usuario descargar pdf (Pagina 37)

8. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

8.1 What to do if...

Problem Possible cause Remedy

You cannot activate or op‐

erate the appliance.

The appliance is not con‐

nected to an electrical sup‐

ply or it is connected incor‐

rectly.

Check if the appliance is

correctly connected to the

electrical supply. Refer to

the connection diagram.

The fuse is blown. Make sure that the fuse is

the cause of the malfunc‐

tion. If the fuse is blown

again and again, contact a

qualified electrician.

Activate the appliance

again and set the heat set‐

ting in less than 10 sec‐

onds.

You touched 2 or more

sensor fields at the same

time.

Touch only one sensor

field.

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the appliance deacti‐

vates. An acoustic signal

sounds when the appli‐

ance is deactivated.

You put something on one

or more sensor fields.

Remove the object from

the sensor fields.

The appliance deactivates. You put something on the

sensor field .

Remove the object from

the sensor field.

Residual heat indicator

does not come on.

The zone is not hot be‐

cause it operated only for a

short time.

If the zone operated suffi‐

ciently long to be hot,

speak to an Authorised

Service Centre.

Automatic Heat Up func‐

tion does not operate.

The zone is hot. Let the zone become suffi‐

ciently cool.

The highest heat setting is

set.

The highest heat setting

has the same power as the

function.

There is no signal when

you touch the panel sensor

fields.

The signals are deactiva‐

ted.

Activate the signals.

Refer to "Daily use" chap‐

ter.

ENGLISH 37

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

Comentarios a estos manuales

Sin comentarios