Electrolux EQWP4510IK Manual de usuario descargar pdf (Pagina 9)

4.5 Power function

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

zone automatically sets back to the

highest heat setting.

Refer to “Technical

information” chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the

heat setting.

4.6 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

The selection of the Timer function is

possible when the cooking zone is active

and the heat setting is set.

To activate the function: touch of

the timer to set the time (00 - 99 minutes).

When the indicator of the cooking zone

starts to flash slowly the time counts

down. When this function is active,

comes on.

To see the remaining time: touch

again and again until comes on. The

display shows the remaining time.

To change the time: touch again and

again until comes on. Touch or .

To deactivate the function: touch

again and again until comes on. Touch

. The remaining time counts back to 00.

When the time comes to an

end, the sound operates and

00 flashes. The cooking zone

deactivates.

To stop the sound: touch .

CountUp Timer (The count up

timer)

You can use this function to monitor how

long the cooking zone operates.

To activate the function: touch . The

symbol goes out and comes on.

To see how long the cooking zone

operates: touch again and again until

comes on. The display shows how

long the zone operates. During the first

minute the display shows the time in

seconds. After the first minute the display

shows the time in minutes.

To deactivate the function: touch

again and again until comes on. Touch

. The symbol goes out and

comes on.

To reset the function: touch . The

time counts back to 00.

If two functions operate at the

same time, the display shows

the CountUp Timer function

first.

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and the

cooking zone does not operate (the heat

setting display shows ).

To activate the function: touch .

Touch or of the timer to set the

time. When the time comes to an end, the

sound operates and 00 flashes.

To stop the sound: touch .

The function has no effect on

the operation of the cooking

zone.

4.7 STOP+GO

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, you cannot

change the heat setting.

The function does not stop the timer

functions.

ENGLISH

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comentarios a estos manuales

Sin comentarios