
Dimensions
Width 596 mm
Depth 600 mm
13.2 Location of the appliance
You can install your freestanding
appliance with cabinets on one or two
sides and in the corner.
Minimum distances
Dimension mm
A 2
B 685
13.3 Levelling of the appliance
Use small feet on the bottom of appliance
to set the appliance top surface level with
other surfaces.
13.4 Anti-tilt protection
CAUTION!
Install the anti-tilt protection
to prevent the appliance from
falling under incorrect loads.
The anti-tilt protection only
works when the appliance is
put in a correct area.
Your appliance has the
symbols shown on the
pictures (if applicable) to
remind you about the
installation of the anti-tilt
protection.
CAUTION!
Make sure you install the anti-
tilt protection at the correct
height.
Make sure that the surface behind the
appliance is smooth.
1. Set the correct height and area for the
appliance before you attach the anti-
tilt protection.
2. Install the anti-tilt protection 77 mm
down from the top surface of the
appliance and 49 mm from the left
side of the appliance into the circular
hole on the bracket. See the
illustration. Screw it into the solid
www.electrolux.com20
Comentarios a estos manuales