Electrolux GK38TSIO Manual de usuario descargar pdf (Pagina 9)

To activate the function for a cooking

zone: touch ( comes on).

Immediately touch the correct heat

setting. After 3 seconds comes on.

To deactivate the function: change the

heat setting.

4.5 Power function

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

zone automatically sets back to the

highest heat setting.

Refer to “Technical information”

chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the

heat setting.

4.6 Timer

Count Down Timer

You can use this function to set how long

the cooking zone operates for only this

one time.

First set the cooking zone then set the

function.The selection of the Timer

function is possible for cooking zones that

are active and after the heat setting is set.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on. When

this function is active, comes on.

To activate the function: touch of

the timer to set the time (00 - 99 minutes).

When the indicator of the cooking zone

starts to flash slowly the time counts

down.

To see the remaining time: set the

cooking zone with . The indicator of the

cooking zone starts to flash quickly. The

display shows the remaining time.

To change the time: set the cooking

zone with . Touch or .

To deactivate the function:

set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

When the time comes to an

end, the sound operates and

00 flashes. The cooking zone

deactivates.

To stop the sound: touch

.

CountUp Timer (The count up

timer)

You can use this function to monitor how

long the cooking zone operates.

To set the cooking zone (if more than

1 cooking zone operates): touch

again and again until the indicator of a

necessary cooking zone comes on. When

this function is active, comes on.

To activate the function: touch . The

symbol goes out and comes on.

To see how long the cooking zone

operates: set the cooking zone with .

The indicator of the cooking zone starts to

flash quickly. The display shows how long

the zone operates. During the first minute

the display shows the time in seconds.

After the first minute the display shows the

time in minutes.

To deactivate the function: set the

cooking zone with and touch or .

The symbol

goes out and comes

on.

If two functions operate at the

same time, the display shows

the CountUp Timer function first.

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and the

cooking zones do not operate (the heat

setting display shows

).

To activate the function: touch

.

Touch

or of the timer to set the

time. When the time comes to an end, the

sound operates and 00 flashes.

ENGLISH

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comentarios a estos manuales

Sin comentarios