Electrolux GK653IF Manual de usuario descargar pdf (Pagina 8)

3.4 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ / There is a risk of

burns from residual heat. The

indicator shows the level of

the residual heat.

The induction cooking zones make the

heat necessary for cooking process

directly in the bottom of the cookware.

The glass ceramic is heated by the heat of

the cookware.

4. DAILY USE

WARNING!

Refer to Safety chapters.

4.1 Operating the hob

You operate the hob with the knobs of the

oven and control panel of the hob. The

"Daily use" chapter for the oven tells how

to operate the hob.

4.2 Using the cooking zones

Put the cookware on the cross / square

which is on the surface that you cook.

Cover the cross / square fully. Induction

cooking zones adapt to the dimension of

the bottom of the cookware automatically.

You can cook with the large cookware on

two cooking zones at the same time.

4.3 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: turn the knob clockwise until

comes on. Immediately set the correct

heat setting. After 3 seconds comes

on.

To deactivate the function: turn the

knob counterclockwise.

4.4 Power function

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

zone automatically sets back to the

highest heat setting.

Refer to “Technical

information” chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the

heat setting.

4.5 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the cooking zone then set the

function. You can set the heat setting

before or after you set the function.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of

the timer to set the time (00 - 99 minutes).

When the indicator of the cooking zone

starts to flash slowly the time counts

down.

To see the remaining time: set the

cooking zone with

. The indicator of the

cooking zone starts to flash quickly. The

display shows the remaining time.

To change the time: set the cooking

zone with . Touch or .

www.electrolux.com8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comentarios a estos manuales

Sin comentarios