Electrolux GK69FTIFO Manual de usuario descargar pdf (Pagina 15)

3. Choose the appropriate level.

To leave the Menu touch or the right

side of the display, outside of the pop-up

window. To navigate through the Menu

use or .

7.15 Assisted Cooking

This function adjusts the temperature to

different types of food and maintains it

throughout cooking. It can only be

activated for the left front cooking zone

or both zones on the left when bridged.

1. Touch on the display to open the

Menu.

2. Select Assisted Cooking and choose

the type of food you would like to

prepare from the list.

For each type of food there are a few

options available. Follow the

instructions shown on the display.

• You can touch OK on top of the

pop-up window to use the default

settings.

• You can set the timer function.

When the pot reaches the

intended temperature you can

activate the timer.

• You can change the default heat

level.

3. Once the pot reaches the intended

temperature an acoustic signal

sounds and a pop-up window

appears. To close the window and

start the function touch OK. To

deactivate the window permanently

check

before you activate the

function.

To stop the function touch and Stop

or touch

and select Assisted

Cooking, choose any type of food and

touch Stop.

To leave the Menu touch or the right

side of the display, outside of the pop-up

window. To navigate through the Menu

use or .

7.16 Melting

You can use this function to melt

different products, e.g. chocolate or

butter. You can use the function only for

one cooking zone during one cooking

session.

1. Touch

on the display to open the

Menu.

2. Select Hob Functions > Melting from

the list.

3. Touch Start

You need to select the desired zone.

A pop-up window appears asking if

you want to cancel the previous heat

setting if there was any.

To leave the Menu touch or the right

side of the display, outside of the pop-up

window. To navigate through the Menu

use or .

To stop the function touch the zone

selection symbol and then touch Stop.

7.17 Hob²Hood

It is an advanced automatic function

which connects the hob to a special

hood. Both the hob and the hood have

an infrared signal communicator. The

speed of the fan is defined automatically

on the basis of the mode setting and the

temperature of the hottest pot on the

hob.

For most of the hoods the remote system

is originally deactivated. Activate it

before you use the function. For more

information refer to the hood user

manual.

The function operates automatically

between H2 and H6. The hob is originally

set to H5. The hood reacts whenever you

operate the hob. The hob recognizes the

temperature of the cookware

automatically and adjusts the speed of

the fan. You can set the hob to activate

only the light by selecting H1.

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Comentarios a estos manuales

Sin comentarios