Electrolux GK69TSIPCN Manual de usuario descargar pdf (Pagina 10)

To deactivate the function: touch /

. The cooking zones operate

independently.

When you use only one cooking zone of

the pair we recommend that you use the

rear cooking zone. Also when you use

large cookware we recommend that you

put it near to the rear cooking zone.

4.6 Automatic Heat Up

Activate this function to get a desired heat

setting in a shorter time. When it is on, the

zone operates on the highest setting in the

beginning and then continues to cook at

the desired heating setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch ( comes on).

Immediately touch a desired heat setting.

After 5 seconds

comes on.

To deactivate the function: change the

heat setting.

4.7 Power function

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

zone automatically sets back to the

highest heat setting.

Refer to “Technical

information” chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the

heat setting.

4.8 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To activate the function or change the

time: touch and then touch or

to set the desired time (00 - 99 minutes).

The function starts automatically. After 3

seconds the heat setting of the cooking

zone comes on the display.

To see the remaining time: touch

for

the desire cooking zone. The display

shows the remaining time.

To deactivate the function: touch

and then touch . The remaining time

counts back to 00.

CountUp Timer (The count up

timer)

You can use this function to monitor how

long the cooking zone operates.

To activate the function: touch . 00

comes on the display. Touch again to

activate the function. When this function is

active, comes on. The display shows

how long the zone operates.

To deactivate the function: set the

cooking zone with and touch . 00

comes on the timer display and after 3

seconds the heat setting appears.The

symbol goes out.

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and the

cooking zones do not operate. The heat

setting display shows .

To activate the function: touch .

Touch or of the timer to set the

time. When the time comes to an end, the

sound operates and 00 flashes.

To stop the sound: touch .

The function has no effect on

the operation of the cooking

zones.

4.9 STOP+GO

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, you cannot

change the heat setting.

www.electrolux.com10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comentarios a estos manuales

Sin comentarios