Electrolux GK906TSIDO Manual de usuario descargar pdf (Pagina 11)

To activate the function: touch of

the timer to set the time (00 - 99

minutes). When the indicator of the

cooking zone starts to flash slowly the

time counts down.

To see the remaining time: set the

cooking zone with . The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

To change the time: set the cooking

zone with

. Touch or .

To deactivate the function: set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

When the time comes to an

end, the sound operates and

00 flashes. The cooking

zone deactivates.

To stop the sound: touch .

CountUp Timer (The count up

timer)

You can use this function to monitor how

long the cooking zone operates.

To set the cooking zone (if more than

1 cooking zone operates): touch

again and again until the indicator of a

necessary cooking zone comes on.

When this function is active, comes

on.

To activate the function: touch . The

symbol

goes out and comes on.

To see how long the cooking zone

operates: set the cooking zone with .

The indicator of the cooking zone starts

to flash quickly. The display shows how

long the zone operates. During the first

minute the display shows the time in

seconds. After the first minute the display

shows the time in minutes.

To deactivate the function: set the

cooking zone with and touch or

. The symbol goes out and

comes on.

If two functions operate at

the same time, the display

shows the CountUp Timer

function first.

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and

the cooking zones do not operate (the

heat setting display shows

).

To activate the function: touch .

Touch or of the timer to set the

time. When the time comes to an end,

the sound operates and 00 flashes.

To stop the sound: touch .

The function has no effect

on the operation of the

cooking zones.

4.10 Pause

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, all other

symbols on the control panels are

locked.

The function does not stop the timer

functions.

Touch

to activate the function.

comes on. The heat setting is lowered

to 1.

To deactivate the function, touch

. The

previous heat setting comes on.

4.11 Lock

You can lock the control panel while

cooking zones operate. It prevents an

accidental change of the heat setting.

Set the heat setting first.

To activate the function: touch

.

comes on for 4 seconds. The Timer stays

on.

To deactivate the function: touch .

The previous heat setting comes on.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comentarios a estos manuales

Sin comentarios