
12 www.electrolux.com
before placing the food in the oven. When
the oven is at the correct temperature,
it will stay at that temperature for five
minutes. If the oven door is not opened
during this time, the microwave oven will
switch itself off.
Preheating the oven for convection
cooking
1. Press the function selector once.
The display will flash "140".
2. Rotate the function selector to select
the convection function.
3. Select the temperature of the
convection oven by continuing to rotate
the function selector. Temperature
range: 140 – 230°C.
4. Press the Start/continue button to
confirm the temperature.
5. Press the Start/continue button to
start preheating. When the appropriate
temperature has been reached, the
beep will sound twice to remind you
that you have placed food in the oven.
The relevant temperature will flash.
6. Place the food in the oven and close
the door.
7. Rotate the function selector to adjust
the cooking time.
8. Press the Start/continue button to start
the oven.
Note:
To use preheating instead of pressing
the Start/continue button, as in point 4 of
Convection cooking, you must rotate the
function selector to adjust the cooking
time.
Note:
The fan will continue to run for a few
minutes after the end of the convection
program in order to cool the oven.
Combination cooking
With this oven, you can combine
microwaving, grilling and convection
cooking. There are four preset
combinations.
Using combination cooking
1. Open the door and place the food on
the turntable. Close the door.
2. Press the function selector once. The
display will flash "140".
3. Rotate the function selector to select
one of the combinations "C-1", "C-2",
"C-3" or "”C-4"; see the table below
4. Press the Start/continue button to
confirm the combination.
5. Rotate the function selector to adjust
the cooking time.
6. Press the Start/continue button to start
the oven.
Combination cooking
Display
Microwave
oven Grill Convection
C-1
3 3 165°C
C-2
3 3
C-3
3 3 200°C
C-4
3 3 3 200°C
Cooking in stages
Up to three phases of cooking can be
set with this oven. If one of the phases is
defrosting, this phase must be set as the
first phase.
The beep will sound after each phase, and
the next phase will then start automatically.
Example:
If you want to cook at 100% microwave
power for 10 minutes and then at 80%
microwave power for 5 minutes, you
should follow these steps.
1. Open the door and place the food on
the turntable. Close the door.
2. Press the microwave power button
once to select 100% power.
3. Rotate the function selector to adjust
the cooking time to 10 minutes.
4. Press the microwave power button
twice to select 80% microwave power.
5. Rotate the function selector to adjust
the cooking time to 5 minutes.
6. Press the Start/continue button to start
the oven.
Comentarios a estos manuales