
4. Put the door on a soft cloth on a
stable surface.
5. Release the locking system to remove
the glass panels.
6. Turn the two fasteners by 90° and
remove them from their seats.
7.
First lift carefully and then remove the
glass panels one by one. Start from
the top panel.
8. Clean the glass panels with water and
soap. Dry the glass panels carefully.
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
Make sure that you put the glass panels (A
and B) back in the correct sequence. The
first panel (A) has a decorative frame. The
screen-printing zone must face the inner
side of the door. Make sure that after the
installation the surface of the glass panel
frame (A) on the screen-printing zones is
not rough when you touch it.
www.electrolux.com18
Comentarios a estos manuales