Electrolux EOD3460AOW Manual de usuario descargar pdf (Pagina 18)

2. Pull the rear end of the shelf support

away from the side wall and remove it.

1

2

Install the shelf supports in the opposite

sequence.

The retaining pins on the

telescopic runners must point

to the front.

10.4 Oven ceiling

WARNING!

Deactivate the appliance

before you remove the

heating element. Make sure

that the appliance is cold.

There is a risk of burns.

Remove the shelf supports.

You can fold down the heating element on

the oven ceiling to clean the oven ceiling

easily.

1. Hold the heating element with two

hands at the front.

2. Pull it forwards against the spring

pressure and out along the supports

on the two sides.

The heating element folds down.

3. Clean the oven ceiling.

4. Install the heating element in the

opposite sequence.

Install the heating element

correctly above the supports

on the inner walls of the

appliance.

5. Install the shelf supports.

10.5 Removing and installing the

door

You can remove the door and the internal

glass panels to clean it. The number of

glass panels is different for different

models.

WARNING!

Be careful when you remove

the door from the appliance.

The door is heavy.

1. Open the door fully.

2. Fully lift up the clamping levers (A) on

the two door hinges.

A

A

3. Close the door until it is at an angle of

approximately 45°.

www.electrolux.com18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios