Electrolux EXS12HE2WI Manual de usuario descargar pdf (Pagina 24)

GD Midea Refrigerant Equipment Co. Ltd Service manual for Electrolux split Series

Abno rm al n o ise

from the indoor unit

Does it happen in

Fan Only mode?

Yes No

Does it happ en with

auto swing?

Check the

swing motor.

Yes

Check the

swing louver.

Check the fan

motor.

Check the cross flow

fan.

Replace the bear.

Does it just happen

in the beginning of

cooling or heating

mode?

It is because

of the heat

rub between

plastics parts.

It is normal.

Yes

Check the input

and output pipe.

Recycle the ref rige-

rant and recharge.

Abnormal noise

from the outdoor

unit

Does it happen in

Cool mode?

Yes

Do the fan blade rub

with the shroud?

Chec k t he

motor.

Yes

Chec k t he

fan blade.

Check the fixing nuts

of outdoor unit.

Check the

motor

supporter.

Check the capillary.

Check the

compressor.

Recycle the refrig e-

rant and recharge.

PROBLEM CAUSE REMEDY

Power failure Check the power cord.

Wiring failure Check the wiring. Replace the terminates or wires if failure.

Transformer failure Check the input and the output on transformer. Replace if failure.

Not operating

Indoor PCB failure Replace after checked failure.

Cross flow fan failure Replace the fan if cracked, out of balance, or partially missing.

Loose screws Tighten them.

Worn bearings Replace after checked failure.

Indoor abnormal

noise.

Motor failure

Replace the motor if knocking sounds continue when running or loose,

or the motor hums or noise appears to be internal while running.

Fan blade failure Replace the fan blade if cracked, out of balance, or partially missing.

Loose screws Tighten them.

Motor failure

Replace the motor if knocking sounds continue when running or loose,

or the motor hums or noise appears to be internal while running.

Compressor failure Replace the compressor if sounds coming from inner of the compressor.

Outdoor

abnormal noise.

Copper tubing

Remove the cabinet and carefully rearrange tubing not to contact

cabinet, compressor.

Display board or

indoor PCB failure Replace the display board. If it is still false, replace the PCB.

Battery failure

Check the voltage of battery. Replace batteries if the voltage is lower

than 2.3V.

Remote control

failure.

Remote control failure

Normally, the remote control is not easy to damage. If the above two

methods are not effectual, replace the remote control.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 41 42

Comentarios a estos manuales

Sin comentarios

Electrolux EXS12HE2WI Manual de usuario Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Acondicionadores de aire del sistema de división Electrolux EXS12HE2WI