search

Electrolux EPH09MLIWI Manual de usuario Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 114
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
ENGLISH 7
Explanation of buttons
Nr. Button Explanation
17 ON/OFF Press the button to switch on the unit. Press the button again
to switch off the unit.
18 MODE Press the button to set the operation mode: AUTO, COOL,
DRY, FAN and HEAT. Default setting: AUTO.
In the AUTO mode, the temperature is not shown. In HEAT
mode, the initial value is 28 °C (82 °F). In other modes, the
initial value is 25 °C (77 °F).
19 FAN Press the button to set the fan speed: AUTO, LOW, MEDIUM
LOW, MEDIUM, MEDIUM HIGH and HIGH. Default setting:
AUTO. In the DRY mode, only LOW can be set.
20 UP ^ Press the button to increase the temperature. Keep the
button pressed for two seconds to accelerate the process.
Release the button to set the temperature and send the order
that the °C/°F signal will be displayed constantly.
Temperature range: 16-30 °C (61-86 °F).
In AUTO mode, the temperature cannot be set. If you press
the UP or DOWN button, a beep will sound.
21 DOWN v Press the button to decrease the temperature. Keep the
button pressed for two seconds to accelerate the process.
Release the button to set the temperature and send the order
that the °C/°F signal will be displayed constantly.
Temperature range: 16-30 °C (61-86 °F).
In AUTO mode, the temperature cannot be set, but the order
can be sent by pressing the button.
22 CLOCK
After battery replacement, “12:00 PM” will be shown. If the
clock symbol is visible, the actual time will be shown. If the
clock symbol is not visible, the timer will be shown.
23 LIGHT Press the button to switch the display of the indoor unit on or
off. When switch on, the light symbol ” ” will be showed.
Default setting: OFF.
AUTO COOL DRY FAN HEAT
AUTO
AUTO
Auto Low Medium-low Medium Medium-high High
Press the button to set the clock. If the clock symbol ” ”
blinks, press the UP or DOWN button to set the time. Keep
the button pressed for two seconds to accelerate the
process. Press the CLOCK button again to set the clock.
The clock symbol stops blinking.
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 113 114

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Acondicionadores de aire del sistema de división Electrolux EPH09MLIWI
Acondicionadores de aire del sistema de división Electrolux EPH09MLIWI Manual de usuario   (114 paginas)
Acondicionadores de aire del sistema de división Electrolux EXH09RLEWE Manual de usuario   (114 paginas)
Acondicionadores de aire del sistema de división Electrolux EPH09MLIWE Manual de usuario    (114 paginas)
Acondicionadores de aire del sistema de división Electrolux EXH09RLEWE Manual de usuario    (114 paginas)
  • ActiGraph Built Right Datalink Systems Tronic Beyonwiz
  • Davis Instruments Las Estaciones Meteorológicas Sennheiser Accesorios para rack Guardian Technologies Luces de trabajo Mackie Altavoces AMS Equipo musical
  • Asus P5N73-CM Epson PhotoPC 3100Z Sony CDP-XE520 Whirlpool WEG745H0FS Miele F 9052 i-1
  • Aeg S72300DSW1 Manual de usuario AEG BPE642120M Manual de usuario Dacor DHI361 Instrucciones de operaciones Jvc PCX290 Manual de usuario Electrolux ESF4661ROW Manual de usuario