
34 www.electrolux.com
Fig.27
Fig.28
2. Take out the air-in grill(together with
the air lter shown in Fig. B). Pull the
air-in grill down at 45º and lift it up to
take out the grill.
3. Dismantle the air lter.
4. Clean the air lter(vacuum cleaner or
pure water may be used to clean the
air lter. If the dust accumulation is too
heavy, please use soft brush and mild
detergent to clean it and dry out in the
cool place).
• The air-in side should face up when
using vacuum cleaner.
• The air-in side should face down when
using water.
5. Re-install the air lter
6. Install and close the air-in grill in the
reverse order of step 1 and 2 and
connect the control box cables to the
corresponding terminators of the main
body.
13.3.3 Duct Type
Fig.29
Fig.30
1. For the unit is a rear ventilated one,
please remove the screws (2 pieces)
xed on the lter and take down the
lter away from the unit.
2. For the unit is a descensional
ventilated one, please push the lter
up slightly to let the position retainer
escape away from the flange xed
holes, and take off the lter according
to the arrow direction.
3. Clean the air lter(vacuum cleaner or
pure water may be used to clean the
air lter. If the dust accumulation is too
heavy, please use soft brush and mild
detergent to clean it and dry out in the
cool place).
• The air-in side should face up when
using vacuum cleaner.
• The air-in side should face down when
using water.
4. Re-install the air lter
Comentarios a estos manuales