Electrolux GA60SLVSCN Manual de usuario descargar pdf (Pagina 81)

The display confirms that the MyFavourite

programme has been saved.

7. OPTIONS

7.1 Option list

Options and settings Values Description

AutoOpen On (default value)

Off

The use of this option saves

energy by opening the ap-

pliance door during the dry-

ing phase. Refer to specific

information provided in this

chapter.

This option is applicable on-

ly to the programme ECO.

Hygiene On

Off (default value)

The use of this option sani-

tizes cutlery and tableware.

During the last rinsing

phase, the temperature

stays at 70 °C for at least

10 minutes.

XtraPower On

Off (default value)

The use of this option gives

very good washing results

for heavy soiled dishes. The

water pressure in the pre-

wash and washing phases

is increased.

Multitab On

Off (default value)

Activate this option if you

want to use multi-tablets.

Refer to specific information

provided in this chapter.

7.2 Multitab

Activate this option when you use multi-

tablets that integrate the salt, rinse aid and

detergent functions. They can also contain

other cleaning or rinsing agents.

This option deactivates the release of salt

from the salt container. The salt refilling

message does not show in the display.

With the use of this option the programme

duration is prolonged to increase the

cleaning and drying results with the use of

multi-tablets.

The option Multitab is not a permanent

option and must be selected at every

cycle.

• On : Multitab on.

• Off : Multitab off.

When you activate the option Multitab the

rinse aid dispenser continues to release

rinse aid. However you can deactivate the

rinse aid dosage by setting the rinse aid

level at 0. In this case the drying results

may not be satisfactory.

7.3 TimeSaver

This option increases the pressure and the

temperature of the water.

The washing and drying phases are

shorter. The total programme duration

decreases by approximately 50%.

ENGLISH

81

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 95 96

Comentarios a estos manuales

Sin comentarios