Electrolux EBSL80SP Manual de usuario Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
A B C
D
A. Turnspit frame
B. Forks
C. Spit
D. Handle
1. Put the turnspit handle into the spit.
2. Put the deep pan on the lowest shelf
position.
3. Put the spit frame on the third shelf
position from the bottom.
4. Install the first fork on the spit, then
put the meat on the turnspit and install
the second fork.
5. Use the screws to tighten the forks.
6. Put the tip of the spit into the turnspit
hole.
7. Lay the back side of the spit on the
turnspit frame.
Refer to "Product description"
chapter.
8.
Remove the turnspit handle.
9. Select a function with the turnspit
position. The turnspit rotates.
10. Set the necessary temperature. Refer
to the cooking tables or the recipe
book.
The turnspit does not stop if
you open the oven door.
If a clock function (Duration or
End) ends and you do not
deactivate the appliance, the
turnspit continues to operate
for the next 10 minutes.
9.3 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Baking tray / Deep pan:
Push the baking tray / deep pan between
the guide bars of the shelf support.
Wire shelf and baking tray / deep pan
together:
Push the baking tray / deep pan between
the guide bars of the shelf support and the
wire shelf on the guide bars above.
ENGLISH
17
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Comentarios a estos manuales

Sin comentarios