Electrolux EEA3440BOX Manual de usuario descargar pdf (Pagina 21)

10.4 Removing the shelf

supports

To clean the oven, remove the shelf

supports.

CAUTION!

Be careful when you remove

the shelf supports.

1. Pull the front of the shelf support

away from the side wall.

2. Pull the rear end of the shelf support

away from the side wall and remove

it.

2

1

Install the removed accessories in the

opposite sequence.

10.5 Catalytic cleaning

CAUTION!

Do not clean the catalytic

surface with oven sprays,

abrasive cleaning agents,

soap or other cleaning

agents. This will damage the

catalytic surface.

Spots or discolouration of

the catalytic surface have no

effect on catalytic properties.

WARNING!

Keep children away when

you clean the oven at a high

temperature. The oven

surface becomes very hot

and there is a risk of burns.

Before you turn on the

catalytic cleaning remove all

the accessories from the

oven.

The cavity with a catalytic coating is self-

cleaning. It absorbs fat.

To support the self-cleaning procedure,

heat the empty oven on a regular basis.

1. Clean the oven floor with warm water

and washing up liquid, then dry it.

2. Set the function

.

3. Set the oven temperature to 250 °C

and let the oven operate for 1 hour.

4. When the oven is cool, clean it with a

soft and wet sponge.

10.6 Cleaning the oven door

The oven door has two glass panels.

You can remove the oven door and the

internal glass panel to clean it.

The oven door can close if

you try to remove the

internal glass panel before

you remove the oven door.

CAUTION!

Do not use the appliance

without the internal glass

panel.

1. Fully open the door and identify the

hinge to the right side of the door.

2. Push the tightening component until

it pulls back.

ENGLISH 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios