Electrolux EFA1030X Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Page 11
11
10. Filter Cleaning and Care
10. Filter Cleaning and Care10. Filter Cleaning and Care
10. Filter Cleaning and Care
Cleaning the outside of the stainless steel exhaust hood:
A care lotion for cleaning and care is included with each unit. Moisten a soft cloth and apply to unit
with light pressure, let dry and then polish in the brushing direction.
! It is very important to take note of the “brushing direction“ when handling stainless steel devices!
Interior Cleaning:
Interior Cleaning:Interior Cleaning:
Interior Cleaning:
The unit must be disconnected from the mains before it is opened!
The unit must be disconnected from the mains before it is opened! The unit must be disconnected from the mains before it is opened!
The unit must be disconnected from the mains before it is opened!
When changing the activated carbon or cleaning the metal grease filter (7/14), clean the accessible
housing parts of grease deposits. This way, the risk of fire is minimized and optimal function is main-
tained. Please wash with a degreasing detergent and damp cloth only.
Filter:
Filter:Filter:
Filter:
Caution!
Caution! Caution!
Caution!
With increasing saturation of fatty residues, the risk of fire increases and the function
of the unit can be impaired.
! Clean the metal filter (7/14) as needed!
Remove the activated carbon insert and the thumb screws before cleaning!
The metal grease filter (7/14) must be cleaned every 8 to 10 weeks under normal operating conditions
(2-3 hours daily) Cleaning should be done with the cleaner which is included with the exhaust hood
however the cleaning can be done in the dishwasher depending on the size of the filter. The cleaning
intervals for the metal filter (7) on the top side of the hood body are shorter during the heavy pollen
season. The inner layers of the metal fat filter (7) are made of aluminum. It resists chemical influences
(corrosion resistance). However, it can be attacked by soda and caustic sode so that a brown discolo-
ration can occur. The frame and the cover sheet of this metal filter is made of stainless steel.
Do not wash metal grease filters (7/14) with other dishes.
When cleaning by hand, rinse the filter several times in hot, soapy water.
Exchanging activated carbon
Exchanging activated carbonExchanging activated carbon
Exchanging activated carbon
The unit must be disconnected from the mains before it is opened!
The unit must be disconnected from the mains before it is opened! The unit must be disconnected from the mains before it is opened!
The unit must be disconnected from the mains before it is opened!
Activated carbon is used to bind ordorants. The frequency with which the activated carbon is to be
exchanged is between three months and one year, depending on frequency of use. The used carbon
can be disposed of in the normal household waste.
Make sure unit is not connected to the mains and without current!
Fold grease collector (11) down
Remove stainless steel filter (14)
Loosen the two thumb screws
Remove stainless steel frame and then remove carbon cartridge
Loosen the two thumb screws again on the carbon cartridge and then replace the old carbon
with the new carbon
Tighten the previously loosened thumb screws
Insert the stainless steel filter (14) into the hood body
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios