Electrolux EGG6043NOX Manual de usuario descargar pdf (Pagina 12)

• The power cable must be placed in

such a way that it does not touch any

hot part.

• Connect the appliance to the mains

with a device that lets to disconnect the

appliance from the mains at all poles

with a contact opening width of mini-

mum 3 mm, eg. automatic line protect-

ing cut-out, earth leakage trips or fuse.

• None of a parts of the connection cable

can not get a temperature 90°C. The

blue neutral cable must be connected

to the terminal block label with "N". The

brown (or black) phase cable (fitted in

the terminal block contact marked with

"L") must always be connected to the

live phase.

8.4 Replacement of the

connection cable

To replace the connection cable use only

H05V2V2-F T90 or equivalent type. Make

sure that the cable section is applicable to

the voltage and the working temperature.

The yellow/green earth wire must be ap-

proximately 2 cm longer than the brown

(or black) phase wire.

8.5 Building In

min. 55 mm

min. 650 mm

550 mm

min. 100 mm

30 mm

470 mm

A

B

A)

supplied seal

B)

supplied brackets

CAUTION!

Install the appliance only on a

worktop with flat surface.

8.6 Possibilities for insertion

Kitchen unit with door

The panel installed below the hob must

be easy to remove and let an easy access

in case a technical assistance intervention

is necessary.

min 20 mm

(max 150 mm)

30 mm

60 mm

B

A

A)

Removable panel

B)

Space for connections

12

www.electrolux.com

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comentarios a estos manuales

Sin comentarios