Electrolux EHG6430X Manual de usuario descargar pdf (Pagina 41)

electrolux 41

Fig. 7

Fig.8

Fitting the hob to the worktop

Carry out the building in of the hob

as follows:

1. Place the seals supplied with the hob

on the front edge of the cut out.

Then, place them at 11 mm from the

side edges and at 10 mm from the

rear edge, as shown in the diagram

7, taking care that the seals meet

without overlapping.

2. Place the hob in the cut out, taking

care that it is centred.

3. Fix the hob with the relevant fixing

clamps, supplied with the injectors

kit (see diagram 8). When the screws

have been tightened, the excess seal

can be removed.

The edge of the hob forms a double

seal which prevents the ingress of

liquids.

a

a) seal

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Comentarios a estos manuales

Sin comentarios