
10.4 Removing the shelf
supports
To clean the oven, remove the shelf
supports.
1. Pull the front of the shelf support
away from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
Install the shelf supports in the opposite
sequence.
The retaining pins on the
telescopic runners must
point to the front.
10.5 Removing and installing
door
The oven door has two glass panels.
You can remove the oven door and the
internal glass panel to clean it.
The oven door may close if
you try to remove the
internal glass panel before
you remove the oven door.
CAUTION!
Do not use the oven without
the internal glass panel.
1. Fully open the door and find the
hinge to the right side of the door.
2. Push the tightening component until
it pulls back.
3.
Hold the pushed component with one
hand. Use a screwdriver with the
other hand to lift and turn the right
side hinge lever.
4. Find the hinge to the left side of the
door.
5. Lift and turn the lever on the left
hinge.
ENGLISH 21
Comentarios a estos manuales