Electrolux EOB5740BAX Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
Clock function Application
00:00 COUNT UP TIMER To set the count up, which shows how long the appli‐
ance operates. This function has no effect on the op‐
eration of the appliance. It is on immediately when
the oven starts to heat. The COUNT UP TIMER is
not activated if DURATION and END are set.
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
and 12:00.
"12" flashes.
1. Touch or to set the hours.
2. Touch
.
3. Touch or to set the minutes.
4. Touch or .
The display shows the new time.
To change the time of day touch
again and again until starts to flash.
7.3 Setting the DURATION
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the minutes for
DURATION time.
4. Touch or the DURATION time
starts automatically after 5 seconds.
5. Use
or to set the hours for
DURATION time.
6. Touch . The DURATION time
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes. and
time setting flash in the display. The
appliance deactivates.
7. Touch a sensor field to stop the
acoustic signal.
8. Turn off the appliance.
7.4 Setting the END
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the END and
to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes.
and the
time setting flash in the display. The
appliance deactivates automatically.
4. Touch a sensor field to stop the
acoustic signal.
5. Turn off the appliance.
7.5 Setting the TIME DELAY
function
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the minutes for
DURATION.
4. Touch
.
5. Use or to set the hours for
DURATION.
6. Touch , the appliance switches to
the setting of the END function.
The display shows flashing .
7. Use
or to set the END and
to confirm. First you set the
minutes and then the hours.
Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds for 2 minutes.
and the time setting flash in the
display. The appliance deactivates
automatically.
8. Touch a sensor field to stop the
acoustic signal.
9. Turn off the appliance.
www.electrolux.com12
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 71 72

Comentarios a estos manuales

Sin comentarios