Electrolux EU 7120/1 C Manual de usuario descargar pdf (Pagina 15)

TruVision TVC-7120-1 Camera User Manual 13

Set the Day/Night mode

In the Setup Menu, go to Day/Night and select the desired mode. The Day/Night

mode has four options: Auto, Color, B/W, and EXT1/EXT2.

Select Color to manually set the camera to color (day) mode.

Select Auto so that the camera can automatically switch between day (color) and

night (black and white) mode.

Auto mode:

Burst: Enable/disable the color burst component of the video signal when the

camera switches to B/W. ON mode maintains the same color signal in B/W so

that the video signal provides better compatibility with certain color

equipment. OFF mode removes the color burst signal B/W video and increase

the total TV lines.

Delay CNT: This is the time in seconds before Day↔Night switches. A long

delay response would be used, for example, to avoid switching from Night to

Day mode when car headlights pass in front of the camera.

Day→Night: Set the threshold level on how dark it should be before switching

from Day to Night mode. Lower (Higher) value makes the camera switched

from Day to Night at lower (higher) illumination

Night→Day: Set the threshold level on how light it should be before switching

from Night to Day mode.

CAUTION: If there is a minimal difference between the Day→Night and

Night→Day values, then camera may switch between Day and Night mode

repeatedly.

Color mode:

Color mode is used for normal lighting conditions.

B/W mode:

B/W mode can increase the sensitivity in low lighting conditions.

1 2 ... 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Electrolux EU 7120/1 C Manual de usuario Pagina 15