Electrolux 137098000 Instrucciones de operaciones

137064300 A (0801)Installation InstructionsElectrolux Front-Load WasherInstrucciones de InstalacionLavadora de carga frontal ElectroluxInstructions d’

10Run some water from the hot and cold faucets 1. to flush the water lines and remove particles that might clog the water valve screens and to determin

11Snap one end of the drain hose hanger 1. (shipped in washer drum) onto the drain hose. Continue wrapping it around the hanger and snap it in place.P

12If your washer has this console:If your washer has this console:Empty washer’s drum and close door.1. After you plug in the washer the first time: wa

13 WARNINGELECTRICALSHOCKHAZARDFailure to disconnect power source before servicing could result in personal injury or even death. B)Removing

14Reversing Door WARNINGELECTRICALSHOCKHAZARDFailure to disconnect power source before servicing could result in personal injury or even death

15Reversing DoorE)ReattachingDoorLocktoFrontPanel 1 Rotate the door lock and move it to the opposite opening. 2 Connect the harness to the d

16Reversing DoorH)RemovingLatchIndicator 1 Insert flat blade screwdriver into open slot of latch indicator. 2 Gentlypryupwardtoreleasetab.

17insert tabinsert tabinsert tabinsert tabpress downand snappress downand snapK)ReattachingStrikerPlate 1 Rotate the striker plate and move it to

18M)ReattachingDoorAssembly 1 Open the hinge to a 90 degree angle. 2 Install the door onto the hinge locating pins. N) Reversing Trim Ring 1

19If replacements parts are needed for your washer, contact the source where you purchased your washer,call1-877-4ELECTROLUX(1-877-435-3287), or vi

2Finding InformationPlease read and save this guideThank you for choosing Electrolux, the new premium brand in home appliances. These Installation Ins

20Notes

3SafetyImportant Safety InstructionsRecognize safety symbols, words and labelsSafety items throughout this manual are labeled withaWARNINGorCAUTIO

4Electrical system requirementsWater supply requirementsGrounding requirementsDrain system requirementsCIRCUIT - Individual, properly polarized and g

5MINIMUMINSTALLATIONCLEARANCES-Inches(cm)SIDES REAR TOP FRONT Alcove 0” (0 cm) 0” (0 cm)* 0” (0 cm) n/a Under- Counter0” (0 cm) 0” (0 cm)* 0” (0

6Installation Requirements38.00”(96.52cm)53.00”(134.62cm)50.6” (128.53cm)*to clear open door31.50” (80.01cm)*to front of closed doorwater supplyconnec

7Unpacking WasherRemoving foam packagingTemporarily remove door tape.1. Open washer door and remove everything from 2. the drum.Close door and reapply

8Unpacking WasherRemoving shipping hardwareInstalling hole plugs NOTERubber expansion material on spacers may need time to relax before they can

9Installation InstructionsraiselowerLeveling your washerExcessive noise and vibration can be prevented by properly leveling the washer.For free standi