Electrolux EBGL80CN Manual de usuario

EBGL80CNEBGL80SPEN OVEN USER MANUAL

Refer to "Care and cleaning"chapter.Clean the appliance and the accessoriesbefore first use.Put the accessories and the removableshelf suppo

The lamp may automaticallydeactivate at a temperaturebelow 60 °C during someoven functions.6.3 Setting the oven function1. Activate the appliance with

Clock function Application00:00COUNT UP TIMER To set the count up, which shows how long the appli-ance operates. This function has no effect on the op

and "00" flash in the display.2. Use to switch between options.First you set the seconds, then theminutes and the hours.3. Use or to

the meat is at the set temperature, theappliance deactivates.CAUTION!Only use the coretemperature sensor suppliedor the correct replacementparts.The c

WARNING!Be careful when you removethe core temperature sensor.It is hot. There is a risk ofburns.9.2 Inserting the accessoriesWire shelf:Push the shel

10.2 Using the Child LockThe Child Lock prevents an accidentaloperation of the appliance.If the Pyrolysis functionoperates, the door is locked.A messa

10.5 Automatic Switch-offFor safety reasons the appliancedeactivates automatically after some timeif an oven function operates and you donot change an

21Install the shelf supports in the oppositesequence.11.3 PyrolysisCAUTION!Remove all accessories andremovable shelf supports.The pyrolytic cleaningpr

When the odour filter is on, the displayshows the symbol .The odour filter stops when you deactivatethe appliance or open the oven door.11.6 Removing

CONTENTS1. SAFETY INFORMATION... 32. SAFETY INSTRUCTIONS...

11.7 Replacing the lampPut a cloth on the bottom of the interior ofthe appliance. It prevents damage to thelamp glass cover and the cavity.WARNING!Dan

Problem Possible cause RemedyThe oven does not heat up. The automatic switch-off isactivated. Refer to "Automatic switch-off". The oven does

Problem Possible cause RemedyThe display shows an errorcode that is not in this ta-ble. There is an electrical fault. • Deactivate the oven withthe ho

min. 3 mm 13.2 Building inDuring installation incombustible matter, NIN SEV1000 and fire protectionguidelines and regulations ofthe Association of Can

A13.3 Installing the oven under awork surfaceBefore the installation, connect the ovento the electrical supply. Refer to "Electricalconnection&qu

12341 = 45 mm2 = 45 mm3 = 60 mm4 = 60 mm = 70 mm123413.5 Electrical connection withthe hobYou can connect the oven to anindependent hob from the curr

Energy efficiency class AEnergy consumption with a standard load, conven-tional mode0.99 kWh/cycleEnergy consumption with a standard load, fan-forced

Point of ServiceMorgenstrasse 1313018 BernZürcherstrasse 204E9000 St. GallenSeetalstrasse 116020 EmmenbrückeSt. Jakob-Turm Birsstrasse 320B4052 BaselC

www.electrolux.com/shop867316106-B-392016

1. SAFETY INFORMATIONBefore the installation and use of the appliance, carefullyread the supplied instructions. The manufacturer is notresponsible f

• Before maintenance cut the power supply.• Ensure that the appliance is switched off beforereplacing the lamp to avoid the possibility of electricsho

• Always use a correctly installedshockproof socket.• Do not use multi-plug adapters andextension cables.• Make sure not to cause damage to themains p

unit or the floor. Do not close thefurniture panel until the appliance hascooled down completely after use.2.4 Care and cleaningWARNING!Risk of injury

2.7 DisposalWARNING!Risk of injury or suffocation.• Disconnect the appliance from themains supply.• Cut off the mains electrical cable closeto the app

4. CONTROL PANEL4.1 Electronic programmer12 3 4 5 6 7 8 9 10Use the sensor fields to operate the appliance.SensorFieldFunction Description1- DISPLAY S

4.2 DisplayA B CDEFGA. Oven function symbolB. Temperature / time of day displayC. Cooking time display / Duration /Minute MinderD. Residual heat indic